[mattpatt]

I'm very close to starting the engine I installed (with lots of encouragement and answers to lots of questions from many of you) in SP3033.

One thing I want to get right is the drive train alignment. In the past I've heard that the specs for the tranny-to-rear was 0.0 +/-0.5 degrees and the drive shaft-to-rear was 5.0 +/- 2.0 degrees. I don't know if the new rear might move more under acceleration (wind-up), etc. and would like to know the specified static alignment specs. Lance at Hillbank is trying to get the specs from the factory but I thought I'd also ask you guys if anyone knows the specs.

thx

Matt