Not Ranked
Solid Pinion Shims
Ok once again the parts supply industry has failed me.
Solid spacer set up on pinion. Help please.
Supplied bushing is 0.431" long
shims are 0.010", (two) 0.012, 0.016", and 0.020"
Put 0.020" + 0.431" = 0.451" total -- rotating torque 1 inch pound.
Put 0.016" + 0.431" = 0.447" total -- rotating torque 45+ inch pound.
No fricking shim combination between the two.
Any guess how much I need to put back?
Last edited by olddog; 06-06-2011 at 06:41 PM..
|