[Cobradad]

I used an automotive stethoscope to listen to each cylinder. Definately #'s 5 & 6 are much louder than the rest. I have no idea of the proper settings for the particular cam in the car. I intend to pull the valve covers over the weekend and visually inspect whats going on. Not sure if I will attempt the adjustment myself, its been over 30 years since I did one. To that end, any ERA folks out there have a reccomended shop. I live just outside of Coatesville, PA. I know Bill used a shop in Pottstown. Wouldn't mind something in West Chester. Thanks for every one's help.
Bob W