Quote:
Originally Posted by PLDRIVE
Chas 4150 with a 1.25 drop down base. I have about 1/4 or less before it rubs.
Brent u will have to notch the block on a dart. I do not think so on a world block.
|
Thanks PL, that's as I remember it. We shaved a Super Vic .500 as a test for Cobras and lost a small bit of torque low down but no HP.
No the World required no notching and the
oil pumps were checked and sometimes touched on an edge. Same Eagle 4.250, 4.155 bore. Aluminums weighed 475 pounds w/carb, w/o water pump.