[Joe Prochazka]

Man.......I just got off of the phone with Maurice Weaver. I had some questions about the throw of a slave cylinder and he asked if I was using a diaphram clutch.

I have already bought a Centerforce and had it balance along with my flywheel.

Maurice says that a slave cylinder on an FE might not have enough throw to release a Centerforce.

I already have the clutch fork and was planning to set the clutch /cylinder up this weekend. Now I may have to scatch this installation and go the hydraulic throw out route.

Has anyone used a Centerforce clutch with a slave cylinder on an FE? If so, does it work OK?