[wrogers55]

Here is one for the fully informed.

I'm still going through the cam issues with my little 418 small block. The motor was supposed to be a high end parts motor and I'm trying to get all the internals identified as I go. Can anyone identify this rotating assembly? The rods are hard to see in the pics, but they are H beam. There is a part or assembly number on the crank, but I can't find a reference for that on the net.

I was told it may be an Eagle assembly. Only important as I'm considering increasing the rev limit with a new cam to between 6,500 to no more than 7 and I want to feel comfortable the motor can take that very occasionally. (Pistons are good for those numbers).

Thanks