Not Ranked
I bought roll bars from CR for my round-tube.
They cost $470 each, including the sleeved third-leg and hefty mounting plate which the third-leg welds to - these are fully functional roll bars. The mounting plate is then bolted to the chassis. This price was in mild steel.
They pipe diameter is 50mm, they are 310mm centre to centre
$470 each, mild steel, and deformed by bending.
Your quoted price in stainless sounds cheap to me.
__________________
BUILD-BLOG: http://cobrablog.holnet.net
Ben in AU
Last edited by Modena; 01-30-2012 at 03:04 AM..
Reason: spelling
|