Quote:
Originally Posted by Rob. Smith
Acetone is one of the 'products' used to "cut" and extend fuel in dodgey petrol stations. Thinners, turps, kero are also used along with some electrical solvents. I've got some in the shed for the fibreglass so I'll mix a bit with fuel and see what happens.
|
It also does bloody horrible things to the plastics in your fuel system which in turn become very corrosive on the alloy bits.
I have lost an engine to this stuff, had to bash the pistons out with a lump hammer.
The car was run for about 20 minutes after the fill and then left sit for two days the EPA was very interested in the fuel sample I gave them and the servo is no longer a no name one and the tanks have been replaced.
Your engine so feel free but I wouldn't.