Thread: Poor Man's Lift
View Single Post
  #1 (permalink)  
Old 02-15-2012, 05:35 PM
Stoney FFR's Avatar
Stoney FFR Stoney FFR is offline
CC Member
Visit my Photo Gallery

 
Join Date: Mar 2008
Location: Burleson, TX
Cobra Make, Engine: Factory Five MKIII Roadster
Posts: 313
Not Ranked     
Default Poor Man's Lift

I thought I would share my latest project. I started with some plans I got from another thread here on CC, but did quite a bit of tweaking to the plans. They lift the car up a little over 10", so with 4" ride height the frame is up over 14".

I still have a few minor things to take care of like installing stop blocks on the front pedestals, painting, reinforcing the ramps with underneath support, pins to hold it all together, etc. Man that was a leap of faith driving up there. It doesn't look like much until your in the car going up the ramps!



__________________
FFR MKIII Roadster #5392

Last edited by Stoney FFR; 02-15-2012 at 07:57 PM..
Reply With Quote