Quote:
Originally Posted by Pman1961
Thanks Glenn and to all who replied. I have a single plane Ford Motorsport Victor Jr. style intake and the best location will be at the top of the plenum in the rear to clear linkages of the carb. I can use a right angle drill and have clearance to drill and tap. Possibly may have to cut the drill bit down in length. I'll complete the procedure tomorrow and follow up.
|
Don't cut the drill bit, just mark the depth with a sharpie. Goto my public profile/albums/winter bling add-ons 2nd pic and you'll see what I did on my victor jr manifold...