[blykins]

I've went round and round with Quicktime over their 6057 bell and a Long style pressure plate. Things that used to fit a year or so ago don't fit anymore...

However, this is the first complaint that I've heard of the 6056....but I'm not really for sure what the issue is here.

In an application where the clutch fork moves to the front of the car, using a late Ford style throw out bearing, there doesn't have to be the clearance that there needs to be with say a Long style pressure plate and a fork that moves towards the rear.

If you have .050-.060" clearance, between the bearing and the pressure plate and there is sufficient room for the fork to move forward, there shouldn't be an issue.