Quote:
Originally Posted by DJPlaster58
Go with the 3M in the front and over the top of the doors I wish I had. I put the T-56 in mine which is nice on the highway cruisin. If you are going to put the oil cooler put in a thermostat; the worst thing you can do for an engine is run with cold oil. I love the look of the oil cooler in Cobra but think the location is accident waiting to happen (rock or some other road debri). If I was going to put an oil cooler in for function only I would use engine coolant to oil type. Good luck Jay will do you right. |
Totally agree with DJ on the oil cooler-I'm waiting on a stat, so I run mine with duct tape over the oil cooler, otherwise it runs too cool.
3M, not sure, seen a couple of BDR's over here in France, and for me there are too many (visible) joints- I'd have a look before you go ahead as i don't know how easy it would be to remove after!
Good luck, Mark