Not Ranked
Normally the offset is used to pull the pushrods "away" from the intake ports - but centering the valve tip is number one, centering the pushrod through the intake opening is also number one...sometimes you have to juggle rockers to get both....hint...
__________________
Survival Motorsports
"I can do that....."
Engine Masters Challenge Entries
91 octane - single 4bbl - mufflers
2008 - 429 cid FE HR - 675HP
2007 - 429 cid FE MR - 659HP
2006 - 434 cid FE MR - 678HP
2005 - 505 cid FE MR - 752HP
|