05-01-2012, 07:12 AM
|
|
Senile Club Cobra Member
|
|
|
Join Date: Feb 2001
Location: Buffalo, NY USA,
NY
Cobra Make, Engine: Superformance
Posts: 4,566
|
|
Not Ranked
Quote:
Originally Posted by 289 Mk111
Sorry...Translation: Wing = Fender
Running Board = Running Board
i.e. the strip that runs parallel with the lower edge of the windows, from front to back, the front and rear sections have a rounded end on One end and square ends next to the door shut, the section in the middle ( Door section) has square ends on either end, so I would have had to change both ends.
I did not pick the running board part as (1) it is wider approx. 1/2", which I believe to be a little too big when scaled from the pictures I have and (2) forming stainless is real hard work without splitting...
Hope this clarifies
Steve
|
I had been told it was the running board piece but agree the upper belt moulding stainless looks more like the piece.
__________________
"I'm high all right, but on the real thing....powerful gasoline and a clean windshield..."
rick@autoventureusa.net
|