Wound up with a fairly large amount of
oil on a drip pan. I don't usually have a drip pan because the garage is carpeted. Drove the car about 6 miles to C & S which is a very good local shop for Cobras and put it up on the rack. Now it has only 1 small drip -- go figure. A fair amout of
oil is around the rear of the pan, front bell housing cover and some splattered sideways on the frame.
Decided to replace the seal regardless and obviously the pan seal. Topside and front of the engine is dry - its not the
oil pressure sensor or intake manifold.
Took Tuesday off and we will see!!!
Decided to let C & S do it instead of lying on my back trying to change it out. After all the help, I could have done it myself, just didn't feel like it. This way I will get the car back the same day.
Thanks everyone for your response, I really appreciate it.
John W.