Quote:
Originally Posted by ERA Chas
Bob has hired Navy Seals to remove that blemish...  |
I slipped them all a couple of bucks to look the other way.
But while I've got you here, what's your preference for gasket choice between my aluminum carb inlet fitting and the Holley float bowl considering today's ethanol blends. In my box of Holley parts I have a pristine "old fashioned" inlet gasket that looks like it could be made of the asbestos stuff that we used as kids; or 2) The newer nylon one they offer; or 3) The steel one they offer. The fitting is the Russel 640750 and it's the threaded male end that has the weeping, not the gasketless blue AN fitting. Any preference?
