Thread: Ultra Street Avenger 670cfm jetting
View Single Post
  #5 (permalink)  
Old 10-19-2012, 09:01 PM
Texasdoc's Avatar
Texasdoc Texasdoc is offline
CC Member
Visit my Photo Gallery

 
Join Date: Feb 2012
Location: Keller, TX
Cobra Make, Engine: Lonestar Classics LS427. Self-built 408W, AFR 195 heads, Performer RPM Intake, Quick Fuel 750, 407rwhp, 479rwtq
Posts: 549
Not Ranked     
Default
I have the 670 Street Avenger. I also bought mine from Summit. However, it was really messed up. Definately someone had bought it and returned it. The secondaries were opened significantly and the primaries closed. Before I figured out how to tune the carb, I couldn't get the idle below 1500.

Mine came with 65 primaries and 68 secondaries. I switched the primaries to 68 and the secondaries to 78. It runs much better now. Before, when it was hot, it would stumble at approx 2500-3k rpm. I don't have an Air-Fuel meter, so not sure exactly where it was.

Edit: Oops, sorry, I have the Steet Avenger, not the Ultra. Not sure was the differences in jetting between the SA and the Ultra is supposed to be.
Reply With Quote