Thread: capillary -> firewall routing
View Single Post
  #2 (permalink)  
Old 01-14-2013, 11:19 AM
MFE III's Avatar
MFE III MFE III is offline
CC Member
Visit my Photo Gallery

 
Join Date: Apr 2006
Location: Los Angeles, ca
Cobra Make, Engine: Hurricane Motorsports, 427w
Posts: 439
Not Ranked     
Default
Rather than drilling such a large hole through the firewall to accomodate the capillary tube, I ran it along the right frame and up the side of the footbox at the front of the tranny tunnel. I then drilled the top of the tranny tunnel into the passenger compartment behind the dash. I ran several wires through this same opening and fabbed an alum channel to conceal them running up the side of the footbox/tranney tunnel. Looks very clean.
Can post a pic later if you're interested.
Matt
__________________
Hurricane Motorsports #1053; 427w
Reply With Quote