[MOTORHEAD]

Brent : Glad someone got a chuckle !
Rick: My cam is a hyd roller spec'd by Barry R. specifically for webers. Current jetting is from Jim Inglese. It's close, but to get it dialed in I think i need a A/F monitor. I have a new wide band sensor & gauges are fairly cheap. I mainly need to know where is the best place for the sensor bung to be welded in. Ideally its in the collector, but on top, vertically, which isn't going to look very good! I've installed a few at about 3-4 o'clock to the inboard. but those tend to get contaminated internally.