Thread: Vic Jr Flange height
View Single Post
  #4 (permalink)  
Old 04-06-2013, 07:00 AM
vatdevil vatdevil is offline
CC Member
Visit my Photo Gallery

 
Join Date: Jul 2010
Location: McMurray, PA
Cobra Make, Engine: Superformance #522
Posts: 528
Not Ranked     
Default
From my notes.
Performer. 4.30/5.30
Air gap. 5.31/6.19
Victor jr. 5.75/5.75

Dynoed my motor with Air Gap and Victor Jr. Air Gap posted higher numbers up to 5000 rpm and Victor Jr slightly better above that but not enough to make up the loss down low. I do run an open spacer on the Air Gap. Motor is 351 with performer RPM heads and QF 750 carb.
Last edited by vatdevil; 04-06-2013 at 07:11 AM..
Reply With Quote