View Single Post
  #20 (permalink)  
Old 04-12-2013, 04:50 PM
tcrist tcrist is offline
Senior Club Cobra Member
Visit my Photo Gallery

 
Join Date: May 2006
Location: Manteca, Ca.
Cobra Make, Engine: None, sold it
Posts: 2,439
Not Ranked     
Default

Quote:
Originally Posted by FWB View Post
Terry, the three set screws are threaded into the wheel around the hub they protrude into the center and catch the groove in the spinner so they don't accidentally fly off.....some are like mine and there are others that have three sockethead cap screws on the face that thread into the wheel. into the holes shown on the face of the hub


the aluminum casting foundry here can sand cast these from a sample, i would do this if i knew i could actually sell them, the little bit of machining on the back side is a simple lathe operation.....i would have to make at least 50 to keep the foundry happy on pricing
FWB,

Got it. I can see one of the set screw holes. Mine have the three cap screws. Learn something new every day.
__________________
Terry
"I may be paranoid, but that doesn't mean they are not watching me"
Reply With Quote