[EarlsflyinCobra]

Good thought Ron, maybe a backup to open the trunk in case of electrical failure is in order. As far as the roll bars go, the first time we did them the company that we bought the powder coat from left out a critical piece of information about the color we are using (they have since corrected that at my request) and the color, which has a black base, allowed the black to bleed through. The second time was our fault, we used all the powder we had on hand and of course we had a malfunction inside the oven and with no more powder to correct the problem we now have to strip them and do them for the third time when the powder comes in......oh well, they say the third times the charm, I sure hope so. By the way, I'm sure someone will ask so the color is Smoke Chrome from Eastwood.