[bktlist]

Thanks everyone for the advice. I trying to get hold of Brian to find out the history on who did what on my rear end / brake package before I got it from LSC to determine if this could have impact the problem. I checked the vent and it looks fine / working. Currie believes the seal just got knicked during installation and is the issue.

I have done some review of the tear down / reinstall and does not look as difficult as I thought so may take a go at replacing this over the weekend. The one activity mentioned is the need to press off/on the bearing. Appreciate any advice on tools required to do this so I can think this through and make a plan.