Not Ranked
I got a complete wiring loom with my half finished kit, and it would still take a lot of time working out what's what.
The fuse box is out of a Commodore, but the rest is all made up. I will draw up my own wiring diagram and colour coding. It looks daunting when you look at the whole mess. Just do one small circuit at a time, and try to solder joints and use shrink wrap. Don't solder terminals,only crimp with the right tool. Label wires as you go with masking tape. And always get a good earth. Eliminate as many connectors possible.
Have fun.
JD
|