Quote:
Originally Posted by joyridin'
Wow..I hit it pretty lucky! My head casting is 340292. It is a racing only over-the-counter head made between 1971 and 1974. It has no heat crossover. These were the best cast iron heads with 2.02 and 1.60 valves.
I threw it on a web site and had 2 offers to sell. They are gone and a set of aluminum are going on!
|
Keep us posted on what type of aluminum heads you get. Pro's and Con's, performance, etc.
I'm considering aluminum heads too with angled plugs.
I've found 1/4" shorter spark plugs that I'll be installing tomorrow. These are 3/8" gasket/crush washer seal plugs. I'll post the plug part number later if all works out successful.