Not Ranked
Agree with the others on the overbore.
We have had several blocks come in from folks that purchased one of those ebay "standard bore 428s" that always are available from one or two sellers.
With very rare exception they always have cylinder walls so thin you can darn near see through them. I've measured some at .060. And I've had at least three rebuilds come in that were split cylinders after getting built.
__________________
Survival Motorsports
"I can do that....."
Engine Masters Challenge Entries
91 octane - single 4bbl - mufflers
2008 - 429 cid FE HR - 675HP
2007 - 429 cid FE MR - 659HP
2006 - 434 cid FE MR - 678HP
2005 - 505 cid FE MR - 752HP
|