Thread: Cooling fans stopped working
View Single Post
  #3 (permalink)  
Old 11-02-2013, 04:29 PM
patrickt's Avatar
patrickt patrickt is offline
Half-Ass Member
Visit my Photo Gallery

 
Join Date: Jun 2005
Cobra Make, Engine: ERA #732, 428FE (447 CID), TKO600, Solid Flat Tappet Cam, Tons of Aluminum
Posts: 22,025
Not Ranked     
Default
Quote:
Originally Posted by kevins2 View Post
Well, my first start went well and everything worked initially - I'll update my thread when I get a chance. Then, the cooling fans stopped working. I have the two front fans and the puller fan. What I've done so far:

Swapped the horn and fan relays, checked the connections to the dash override switch and touched the two leads on the thermoswitch together to see if the switch was bad.

All the fuses look good.

Any ideas?

Thanks,

Kevin
I would then suspect the plug that is on the driver's side, adjacent to the radiator, right at the fender well. Turn your fan override switch on and start wiggling that plug and the wires to it. See if that fires her up....
Reply With Quote