[lippy]

I installed and bled (several times) my slave and I *think* all of the air is out of the system. When I press the clutch pedal, I start to feel slight resistance at about an inch, and the slave rod barely starts to move out when I move the clutch pedal about 1.5". I adjusted the rod so in the slave so there is 1/8-1/4" play. Where the slave rod meets the clutch fork, I get a total of about 1/2" - 3/4" movement.

Do (1) the amount pedal travel before engagement, and (2) total fork travel seem right?

Thanks!