[my427cobra]

Hi all. A little background. I have 4 piston calipers on the front and single piston calipers (Ford Lincoln Versailles) in the rear.

My current m/c setup was advised by brake company X and I was told to use 3/4" m/c's front and rear. My pedal pressure has been low to moderate and brake performance acceptable but I would like a harder pedal.

Contacted Tilton with all my info (they have a comprehensive question sheet) and they came back with a ¾” front and 1” rear (due to the size of the single rear pistons).

So now to find a 1” compact m/c (due to my space limitations).

Most compact m/c’s have a short 1’’ or 1.1” stroke.

So I’m wondering if that will be enough.

I’ll call Tilton again tomorrow.

Cheers
Greg