Well I just got my Cobra yesterday and put it on the road today. Before I did anything I wanted to change the
oil. It has a 7Qt pan,
Oil cooler and 3Qt Accusump. The dip stick was like 2 inches above the full mark , but someone put a notch in the dipstick and that is where the
oil was up to. I assume that is where the oil should be because it was a stock looking dipstick. Well after doing the whole process of draining the pan and dumping the accusump I proceeded to do the fill process. Pulling the dipstick in and out. The last time I pulled it out I wiped it off and THIS IS WHAT HAPPENED. The tip broke right off where they notched. Holy crap! I'm still shaking. Just sharing my 2nd day as a Cobra owner...
