View Single Post
  #8 (permalink)  
Old 04-30-2014, 08:38 AM
blykins blykins is offline
CC Member
Visit my Photo Gallery

 
Join Date: Dec 2001
Location: Louisville, KY
Cobra Make, Engine: I'm Cobra-less!
Posts: 9,417
Send a message via AIM to blykins
Not Ranked     
Default

How much vacuum are you making?

Bill, I would agree that a lot of guys typically put carbs on that are too big. In this case, I think Jim is on the fence.

Usually, when the carb is too much for the engine, it shows lean as the engine isn't efficient enough and can't suck hard enough on the carb to produce a good signal.

In this case, he's possibly running a little rich, which could be just a jet change, air bleed change, or if he has lower vacuum, it could be opening the power valve prematurely.
__________________
Lykins Motorsports, LLC
Custom SBF/Cleveland/FE/385 Series Engines
Street, Road Race, Drag Race, Pulling Truck
www.lykinsmotorsports.com
www.customfordcams.com
brent@lykinsmotorsports.com
Reply With Quote