Quote:
Originally Posted by xb-60
What modifications are required on a later solid roller 302/5.0litre block to fit
1. solid roller lifters and cam?
2. solid flat tappet lifters and cam?
Easy? ....hard?
Cheers,
Glen
|
On a newer hydraulic roller 302 block,there are no mods needed......swap out the hydraulic lifters for solid roller lifters,put in a solid roller cam and the appropriate length pushrods and the correct distributor gear and go.....
Ran a solid roller cam in my 331 race engine for 8 seasons,I'd check the lash once a year and that's all........7000 rpm chip in the box,although on the dyno we revved it to 8000 just to see what the numbers looked like....
David