Not Ranked
you can correct the front to rear 1/4" problem by cutting a 1/4" out of the lower control arm.
to move the rear end 1/2" is harder. Look at the way to upper and lowers are installed. Sometimes washers are used as spacers.
The front to the rear measurement is important but I think the side to side no so for a street car.
Call Barry McGill
sorry I don't have his number but I'm sure someone will have it.
Dwight
__________________
''Life's tough.....it's even tougher if you're stupid.'' ~ John Wayne
"Happiness Is A Belt-Fed Weapon"
life's goal should be; "to be smarter than inanimate objects"
|