Quote:
Originally Posted by damage
And this is Lances reply:
"...The issue with the heads are the core shift in Coons castings and the reason we no longer use his heads, we now use the Pond...
|
Well, they're still advertising the Coon heads for sale as just heads separately or installed on their SOHC engines.
Again, if one goes back and reads the various FEForum threads on the Bill Coon saga, including lawsuits, his aluminum heads had porosity problems dating back to 2010-2011.
As I mentioned before, several years ago, I almost bought a set of Coon heads. But "reading the tea leaves", there was no way I was going to lay out $5,000-$6,000 (then machine and build them w/valves, probably another $2,500) for his problematic heads. Thank goodness.