[deano59]

cheers spooky
the panels im using are solid plastic with alloy covering it alcubond i think its called
trailer will def be wedged shaped at the front ive towed flat front trailers and its like pulling a block of flats .
i am getting the smart charge disabled on the ranger so i can charge a battery in the trailer as well thats getting turned off next service ..
tie down points i will be putting a few down the length of the trailer so it will be good for most cars . good point on the tyre rack and duly noted as is the tip for the jockey wheel and the rattle gun i like that one lol.
i used to have a tilt tray and water got into the solenoid on the winch the cable was anchored to the back of the truck and when it let go it smashed thru the back window lesson learned . rear door will be the ramp im past the point of pulling ramps out even my old open trailer the ramps are mounted on the back and just swing down .

in the last 18 months or so ive built 6 trailers but this will be the first enclosed one and im looking forward to to be honest .
cheers dean