[Chicagowil]

Thx! Will look closer when I bring it home nxt weekend. I will use a "stock" chrome 5.0 pan. It was tough to look closely in its current location. Noticed there were a stack of washers on the trans cross member to lower it. That would just make the motor angle worse! Have to pull the engine/trans out anyway to put in my T5Z and the TFS Twisted Wedge alum heads & Kenne Bell SC. Figured I can always look @ using the old Tran-Dapt Hot Rod hoop mount we used in the old days w/a SBF. Just have to turn it around to match the cutout on the 5.0 pan. Or I can use the later "Biscuit" mounts that are popular now.