Thread: How were/are the alloy bodies attached to the tube frame?
View Single Post
  #6 (permalink)  
Old 05-30-2015, 09:24 AM
wrist_pin's Avatar
wrist_pin wrist_pin is offline
CC Member
Visit my Photo Gallery

 
Join Date: May 2015
Location: near Pittsburgh, Pa
Cobra Make, Engine: Perhaps someday; Ford 4.736 litre - formerly locked up but I've successfully disassembled it completely w/o destroying anything
Posts: 35
Not Ranked     
Default
Thanks for the input guys. I am having trouble posting.

Well, now I can post again. A moderator must have read one of my many pleas for help. Thanks!

~~~~~~~~~~

I am not seeing this in pictures, but I'll pay more attention when I look at builder's pics. I am seeing bulkhead supports but no rivetting going on.

I have only seen one alloy bodied cobra since the 70s and that was in Moon Twp. If I see another one, I'll have to check it out more closely.

I was reading a FiberFab manual for a Cobra and they didn't do a thing like your saying with the fibreglass.

Forrest
Last edited by wrist_pin; 05-30-2015 at 09:30 AM.. Reason: addition since I found I can post again
Reply With Quote