Quote:
Originally Posted by tkb289
Guy,
Very interesting. With the fuel tank mounted in the floor of the trunk/boot, as in the 427 cars, I would assume though that PACE would still locate the fuel filler behind the driver (RHD) for cosmetic purposes, rather than in the right rear fender (427) location?
I would also assume that they will use the forward brace (FIA/289 setup) for the roll bar, correct?
- Tim
|
You're correct, Tim.
Here is a shot of the fuel tank installed in a 427...
....so in my car, being an FIA replica, not a 427 - the fuel filler will be located behind the driver. FIA-bodied cars, LHD or RHD, all have the fuel filler located on the RHS.
Here's COB6008 for a graphic of the filler location:
And yes, AP2289 will have the 289FIA-correct forward braced roll bar. The mount for the forward brace is on the left side of the transmission tunnel, a little forward of the gear shifter location.
Here's a shot of the roll bar bracing in....COB6008:
Cheers,
Glen
*Craig or Warren - please jump in and comment if there's anything I've missed*