[Fast289]

Greetings.

I am sure this topic has been beat, however, I am stuck.

I have a 14" O.D. Air cleaner that is 2" tall, my air cleaner bottom is flat. My hood or bonnet (always liked that word) hits the sides of the filter top. I can't use an offset 14" because the offset hits my Quick Fuel carb where the front jet is. I can't use a dropped bottom because it hits my distributor. The smaller diameter cleaners I have tried All have raised bottoms.

Not sure what else to try. I do have quite the collection of air cleaner bottoms and filter though.

Thanks