I rented a shop, and made a deal with the previous tenant and bought his big (unknown brand) 2 post lift. I love working on the underside with it 2" above my head, so my hair barely mops up the leaked
oil. BUT, it's a pain in the a$$ getting the car up and on it. the pipes are too low to swing the arms in with the extension pads, but the frame is too much higher. I have to use a floor jack and lift the car 4" to swing the arms under the frame. When I lower it, I set it on 4 wood blocks and just drive off.
It may be more an issue with my car how I built the pipes low.