[pormgb]

Thanks for your reply's!!

Answers;

- All bleedr's are facing up
- I need to confirm MC travel, I'm on my second MC with the same problem.
- Pads are close to rotors
- Master is pumping fluid, I removed the rear line at the junction and a load of fluid
shot out when pumping brakes.

Regarding trouble shooting; I changes the brake lines and gravity bled the system, I also see no sigh of leaking fluid, I am also on my second MC with the same issue.

A funny thing; When I have the power bleeder attached and pumped up to about 15lb, the brake pedal does get quite hard, when the pressure from the bleeder is removes the pedal goes soft.