Cobra 29,
Yes, I ordered a nice setup from him--7" CB lenses w/daytime driving lights, 100/90W Narva bulbs, 40A relays and nice inline high current ceramic fuse holders. The sockets for the 40A relays and the H4 bulbs are very nice--they accept 10 gage wire. The inline fuse holders also take 10 gage wire with no problems. If you drive at night, lights are like brakes--you can't have too much
Dan was a pleasure to deal with. Very honest and takes the time to make sure you get what you need. One warning however. The 130/100W bulbs are not nicknamed
paintburners for no reason. If you decide to go with those, make sure they always have adequate cooling (ie don't leave the high beams on when you are idling in traffic).
Tim, those were my thoughts exactly on the Lucas switches
. Also, you don't need to mount the relays in the engine compartment. Mount them under the dash and extend the power cable running from the relay to the powered device (fan, headlamp, etc.). That way the relays will live a long, happy life
Mike