View Single Post
  #15 (permalink)  
Old 05-10-2002, 09:05 AM
Flyin_Freddie's Avatar
Flyin_Freddie Flyin_Freddie is offline
CC Member
Visit my Photo Gallery

 
Join Date: Aug 2000
Location: Germantown, TN,
Cobra Make, Engine: Superformance #770, Stroked 351W (393 cubes) w/ Tremec TKO-600, 3.27 Torsen locker, 'Hi-Tech' Blue w/ White Stripes, Wilwoods, Bilstein coil overs...and a big ear-to-ear grin!
Posts: 1,147
Not Ranked     
Smile

Yes, Bill...that's the Olthoff designed tig-welded surge tank. I've since used some Mother's Metal Polish on it and it looks chromed, now. I didn't take it off the car, though, but just polished it as it was mounted. I plan on removing it to really polish it up sometime in the future, but probably not before DVSF.2.

Speaking of Double Venon....Ed's got a good idea about bringing the Rhino-Hide up the sidewalls a little - say 2 inches, or so. I didn't put mine down, the former owner did, so I didn't have any input. But, it looks professional, works well, and seems to be holding up well. Bringing it up the walls some would indeed seal the floor/wall joints better and would be worth considering.

FWIW...I've seen some trailers that have been finished with linoleum tiles, too. The only caveat I've seen is that sometimes the tiles pull up when the car is placed on them and then tied down. This seems to put some side load on the tiles, and had caused some of them to pull loose. They're easy to put back down, but I wonder if there's something else that can be done to prevent this from happening. My friend, Ron Frohs (SPF#723) had this problem, and he installed some 24x24" ATP squares right where the tires contact the floor. Seems to have solved the problem.

Anyway, just thought I'd mention this. You'll have a lot of trailers to look at when you go to DVSF.2, so your idea is on target! Look for me...my trailer's got big Flyin' Freddie graphics on the side of it. Hope we can hook up...
__________________
Flyin_Freddie
"An opinion on everything...an expert at nothin'!"
WARNING: The opinions expressed herein do not necessarily represent those of the management, editors, or owners. We welcome differing opinions, and recognize our responsibility to offer differing views. May cause drowsiness, restlessness, or irritability. Do not operate heavy machinery while using this product. Void in Alaska, Hawaii, and Puerto Rico, or where prohibited, licensed, or regulated by law. We reserve the right to limit quantities. Offer good while supplies last. No substitutions allowed. Please observe posted speed limits. Professional driver on closed course. Do not try this at home. Please wear your seatbelt at all times. Close cover before striking. Use at own risk. Please dispose of properly. Drink responsibly. Prolonged exposure to vapors has been shown to cause cancer in laboratory animals. Do not use this product of you are pregnant, or plan on becoming pregnant. Intentional misuse by deliberately concentrating and inhaling fumes can be dangerous. Always wear safety glasses. In case of eye contact, flush with water and seek immediate medical attention. For occasional use only as directed. Avoid prolonged skin contact. Discontinue use if rash develops. If symptoms persist for more than three days, seek professional medical attention. Hearing protection required beyond this point. Danger: Hot surfaces. Use as directed. Proceed at own risk. Caution: Filling may be hot. Please don't litter. Actual results may vary. It is a violation of Federal Law to use this product in a manner other than as intended. Do not use this product if you have an enlarged prostate, or have difficulty urinating.
Reply With Quote