[Luce]

I made just such a contraption, then when I finished my cobra, sold it to another cobra builder. If you search for my build thread on Ultimate's site, you may find a pic. I used a 12V horrible fright winch, and restrung it so there were 2 leads. On went straight down, and the other 7' down a 2x4 the winch was mounted on to a pulley, then down. I laced a rope around the roll bar holes for one lead, then ran a 2x4 through the side vent holes and a bridle to the other lead. Then with th epush of a button, I could raise or lower the body off of the frame, and roll the frame out.