Thanks guys
I understand the front suspension is a little to wide and maybe rims will correct that. What front end and rims are you guys running?
I bought a '94 rear end and installed it. I had a pair of 9 1/2' Team III rims in the back room, so today I put them on and took a few measurements. Looks like I need to cut the rear down 2" to have room for big tires.
This one has a FE in it and it's going to be a challenge to get that big motor in
After looking at it for a couple of hours today I decided to move the motor back 2" - 3" and down 2" or so. That is the only way this big block will fit under the hood.
Dwight