Dan, I'll post a pic, there isn't much to show. The Crendon is designed to have a cable linkage rather than mechanical, and being UK, my car is RHD. It is possible to have a mechanical linkage on a RHD car, but its more complicated. Biggest problem for me is the top of the footbox being higher than an original car and the throttle (gas) pedal, being RHD, therefore being on the far opposite side rather than inside top corner of the footbox. So its cable linkage for me as the easiest way forward. I can make a bracket if i have to....just want to make sure I understand whats needed before i start my usual process of making at least 1 or 2 prototypes that end up in the scrap bin
