[Danr55]

I am attaching the photos that I took of the car today. I was wrong about the front end. It is a coil spring front end and not a torsion bar suspension. The car orgininally came out of Don Borders shop in Hemet Ca. So you know it is well done. Besudes the peddale box installation, all of the forward and rear control arms and A arms are billet machined. There are three dual 4 barrel carb manifolds that go with the car. One of them has two Holley 550 or 600 cfm carbs. Chasis number is CCX3-3847. As shown it is the later configuration with the X frame for stiffness and the coil over front end.