Thread: Ideal water and oil temps.
View Single Post
  #13 (permalink)  
Old 02-27-2017, 05:09 PM
RET_COP's Avatar
RET_COP RET_COP is offline
CC Member
Visit my Photo Gallery

 
Join Date: Jul 2009
Location: Westerly, RI
Cobra Make, Engine: Fordstroker 408w custom solid roller-Craft ported Brodix 17*heads-CFM ported Vic Jr. intake-1 3/4 primaries- 575hp-TKO-600RR Liberty upgrade- -Moser 8.8 trutrac-McLeod Street Extreme--QA-1-Wilwood brakes, Classic Chambered 3" Cobrapacks, Avon's
Posts: 645
Not Ranked     
Default
New England -- Oil and water run close at 180F. Oil will go higher if I'm running through the gears, but will drop on cruise [I disconnected the cooler]. Oil temp is taken in the oil pan I'm sure it's much hotter near the bearings. coolant in the intake. Coolant stays the same. 351w
__________________
Lou
Reply With Quote