[wkooiman]

Thanks everyone for the help.

I put everything back together today, twisted half shafts and all. This is currently my daily driver, so I'll just drive it easy until I replace the half shafts. When my Cobra is down, I drive my wife's car, which is nice, but it isn't a Cobra.

On the positive side, I found the squealing noise. The back right outer wheel bearing was dry. The seal race was spinning where it shouldn't. There were witness marks on the wheel hub side of the race. I repacked everything with new bearings, etc., and the weird noise is gone.

Now i need to order half shafts, and I'll pull it apart again and fix the twisted shafts.