[RockBit]

I have a Quicktime bell housing behind an FE. I didn't trim the lower flange when I originally installed everything, but it worries every time I see a speed bump with grooves in it from cars hitting it. I have the bell housing off the car right now and can trim it easily.

It looks like I could take about 1/2 inch off at the most. Currently the bottom of the bell housing is almost 1 1/4 inches below the frame rails.

My question is 'Have you guys with Quicktime bell housing trimmed yours?'.

Lakewoods have a much larger flange and would obviously need to be trimmed.

Thanks